2026 Sea Pro 250 DLX Suzuki 300 HP
2026 Sea Pro 250 DLX Suzuki 300 HP
- Suzuki Digital DF300APX (Black) 300HP
Hull Side Color (Platinum) - Console Color (Platinum)
- Top Color (Shark Skin Gray)
- Underside Color (Shark Skin Gray)
Fiberglass Hard Top
Deluxe Leaning Post
Forward Seating
Trim Tabs
Hydraulic Jack Plates (12″)
Simrad Unit 1 – NSX12
B60 Transducer
VHF Radio RS20
SPECIFICATIONS
- Length 24’8″
- Beam 8’9″
- Max Horsepower 350
- Capacity 10
- Deadrise at Transom 15°
- Draft 15″
- Fuel Capacity 70 gal.
- Pressurized Livewells 30 gal. (2)
- Dry Weight w/o Engine 3,432 lbs.
HEIGHT
- Hard Top on Trailer: 124″
- Grab Rail on Trailer: 102.5″
- Hard Top to Waterline: 93″
- Grab Rail to Waterline : 72.5
SEA PRO STANDARD
Helm/Top
- Simrad MFD 9″
- Thru-Hull Transducer
- Power Steering w/Tilt Helm
- Sea Pro Connect App
- Audison Marine Audio
- Console Dry Box w/USB
- Compass
Cockpit/Seating
- Standard Leaning Post
- Stern Bench Jump Seat
Hull/Deck
- Swim Platform w/ Ladder
- Battery Management System
- Raw Water Washdown
- Trolling Motor Plug w/Harness
- 10-Year Hull Warranty
- 10-Year Hull Warranty
- Powder Coating
- High Volume Cockpit Drainage System
- Single Outlet Manifold System
- Stainless Steel Cup Holders
- Stainless Steel Rod Holders
Storage/Fish Boxes
- Bow Insulated Fish Box 150 qt.
- Mechanical In-Floor Compartment
- Stern Storage Box 100 qt. (2)
- In-Floor Storage Box 80 qt.
- Bow Lockable Rod Storage Bow (2)
- Under Gunnel Rod Storage (2)
- Finished Anchor Storage Box
- Stern Bench Jump Seat Storage Box 150 qt.
OPTIONAL FEATURES
Helm/Top
- Hard Top, Canvas Top, or No Top
- Deluxe Console (Larger Console)
- 3 Sided Windshield Enclosure (Removable)
- Console Glass Bridge
- Simrad Electronic Upgrade
- Audio Upgrade (Amp, Sub, & 6 Speakers)
- Trim Tabs
- Zipwake Auto Level Tabs
- Wireless Phone Charger
- VHF Radio
- T-Top Misters (Fresh Water Req.)
- Dash Mister Vents
- Helm Pad
- Light Bar for T-Top
Cockpit/Seating
- Deluxe Leaning Post
- Deluxe Tackle Center
- High Back Rest
- Arm Rest
- Flip Up Bolsters
- Bow Cushion
- Bow Casting Chair w/Pedestal
- Forward Seating
Hull/Deck
- Power Pole Shallow Water Anchor 10′
- Hydraulic Jackplate 12″
- Trolling Motor
- Battery Charger
- Add’l Swim Platform w/Ladder (Strb)
- Phender Pro Clips w/Fenders
- Air Compressor
- Fresh Water Wash Down w/tank 11 gal.
- Underwater Lights
- Cooler Slide
- Cooler 50L
- Cooler 80L
- Outriggers
- Built-in Tackle Storage (2)
- Under Gunnel Rod/Ruler Pad
- Ski Tow Bar
- Additional Stainless Steel Cup Holders
- Additional Stainless Steel Rod Holders
- Stainless Steel Rod/Cup Holder
- Pump Out Head
Canvas
- Console Cover
- Sun Shade Stern
- Gull Wings
- Sun Shade Bow
- Bimini Top w/ Boot Bag
- Mooring Cover
- Spray Shield
Gelcoat Options
Ice Blue
Standard White
Sea Creature
Sea Foam
Platinum
Shark Skin
Upholstery Options
Pure White
Platinum
Cafe Mocha
Sand
Powder Coating Options
White
Hammer Grey
Black
BUILT TO LAST
Foam Filled
The hull sides and boxes in the deck are foam-filled and sprayed with a vinyl ester barrier coat to prevent osmotic blistering. Creating a quieter ride while underway improves the insolation of fish or cooler boxes and enhances overall safety.
Hull Construction
Hulls and decks are gel coated, then a vinyl ester barrier coat is sprayed on all hulls to prevent osmotic blistering from the waterline down. We also gel coat all capping knuckles and hull sides to enhance the profile.
Stringer System
We have an individual, one-piece finished and gel-coated stringer system for each model. The stringer system is attached to the hull with Methacrylate for a strong chemical bond. All stringer systems are also completely gel coated to prevent mold and make them easier to maintain.
Browse through the vast selection of boats and engines that have recently been added to our inventory.
Ocean Isle Beach Web Design & Hosting by Awesome Website Guys 
